[TR] Copper v Steel Fig "8"

andrew uprichard auprichard at uprichard.net
Mon Jun 29 16:01:52 MDT 2020

Since these gaskets have to make a seal, I have always preferred the copper
ones.  I know some people use sealer with the steel ones, but I have no
experience with them.


-----Original Message-----
From: Triumphs <triumphs-bounces at autox.team.net> On Behalf Of bill beecher
Sent: Monday, June 29, 2020 4:53 PM
To: Dave Ranteer <triumphs at autox.team.net>
Subject: [TR] Copper v Steel Fig "8"

Just received my 87mm pistons and liners from TRF, the package included
steel figure eight gaskets, my gasket kit from TRF included copper ones.  Is
there any consensus as to which is preferred?
Bill B

Serenity Now......
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive


More information about the Triumphs mailing list