[TR] Copper v Steel Fig “8”
Jerry Van Vlack
jerryvv at roadrunner.com
Mon Jun 29 15:08:17 MDT 2020
You should measure the liner protrusion with one or the other installed. In
my case I found the figure 8's were different thickness. Use the figure 8's
that result in your liner protrusion being within spec.
JVV
-----Original Message-----
From: bill beecher
Sent: Monday, June 29, 2020 4:53 PM
To: Dave Ranteer
Subject: [TR] Copper v Steel Fig “8”
Just received my 87mm pistons and liners from TRF, the package included
steel figure eight gaskets, my gasket kit from TRF included copper ones. Is
there any consensus as to which is preferred?
Thanks,
Bill B
TS30800L
Serenity Now......
** triumphs at autox.team.net **
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/jerryvv@roadrunner.com
More information about the Triumphs
mailing list