[TR] Triumphs Digest, Vol 13, Issue 163

[michael muller]

Is this a new issue, or was it this way all along.  There are a few "stops" in the system.  
1. The metal channel on the bottom of the glass needs to be mounted correctly; if this was reinstalled by a previous owner it could not be installed in the correct location.  
2. There is a stop bolted against a channel in the door, but I do not think this is adjustable.
3. Finally, there is a stop in the bottom of the door, against which the glass physically rests when all the way down.  Does the glass reach this stop?
Good luck - folks smarter than me may chime in as well.
My drivers window will not go down all the way. It leaves 2 inches of
window left to roll down. It just comes to a sudden stop and won't go
further. I've taken the door apart and inspected. I can't find
anything odd. When I measured the window height of the window and
compare it to the passenger side it's about 1 !/2" higher when rolled
up. I've checked the gears and the teeth look good and the coil spring
looks good. I guess I'm going to have to take the passenger door apart
and really compare the two. Any ideas?


*****************************************
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200622/01a42239/attachment.htm>