[TR] TR2 Doors

DAVE HOGYE dlhogye at comcast.net
Wed Jul 22 09:43:50 MDT 2020

Perhaps the doors are from a different tub.  You might just have to open or slot the holes in the door and/or b-pillar. Whatever is necessary. I think the striker side has a caged threaded plate in the b-pillar and it may be to it's limit, so that is more difficult to address.  
Dave H.
> On 07/22/2020 7:44 AM John Deluca <john-marie at sbcglobal.net> wrote:
> Listers,
> In final assembly of my TR2 that was partially restored by the PO.  The doors fit well, but the latches don’t line up with the striker plates.  Both latches are too high to nest in the striker plate.  The latch hits above the striker plate opening.  I’ve used all the available play in both pieces and made slight adjustments to the doors.  I’m at a dead end.  Any suggestions will be appreciated.
> John DeLuca
> Sent from my iPad
> ** triumphs at autox.team.net **
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dlhogye@comcast.net

More information about the Triumphs mailing list