[TR] TR4 Hood Badge

Dressler Jr., Edward Thomas etd at psu.edu
Mon Feb 17 11:16:20 MST 2020


I tried a new one and it didn't sit flat.   found a good old one.  No way would the new one fit!



Get Outlook for Android<https://aka.ms/ghei36>
________________________________
From: Triumphs <triumphs-bounces at autox.team.net> on behalf of Don Hiscock <don.hiscock at gmail.com>
Sent: Monday, February 17, 2020 12:30:39 PM
To: Jim Henningsen <trguy75 at gmail.com>
Cc: Triumphs <Triumphs at autox.team.net>
Subject: Re: [TR] TR4 Hood Badge

The badge mounting holes on the apron currently on my TR3B (not the original, which was upgraded to this one thirty five years ago) are slightly out of round.  The original style inserts would never have worked.  For a few years I had the flat spring speed nuts on the mounting posts, and the badge was tight with no movement.  But I hate those things.

A few years ago I threaded (carefully) with a die the posts on my reproduction badge and it's now mounted with nyloc nuts and plastic washers.  It accomodates the slightly out-of-round holes quite well.  I'm very happy with this approach and would recommend it for anyone who thinks it might make sense for their car.

Don
Saint Louis
1962 TR3B

On Mon, Feb 17, 2020 at 10:08 AM Jim Henningsen <trguy75 at gmail.com<mailto:trguy75 at gmail.com>> wrote:
Ordered a new enameled hood badge as the body shop had tried to bend it to
fit the holes and cracked the enamel.  The holes on my 62 TR4 hood are not
quite matching up with the aftermarket hood badges.  This one is from
England.  Any thoughts on fixing this before I experiment.  Badges ae too
expensive to try and bend the mounting tips.  I am thinking I need to shave
one of the holes on a top or bottom side to increase length between holes. I
know this may allow badge to shift after install, but what options are
there?
Thanks
Jim Henningsen
Ocala FL
61 TR3A
62 TR4
75 TR6
81 TR8


** triumphs at autox.team.net<mailto:triumphs at autox.team.net> **

Donate: http://www.team.net/donate.html<https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.team.net%2Fdonate.html&data=02%7C01%7Cetd%40psu.edu%7C5107e1710e51475fa17308d7b3cf2474%7C7cf48d453ddb4389a9c1c115526eb52e%7C0%7C0%7C637175574560854589&sdata=AZmPspfO2b1VCNj6YYd3nGg6PBsMMWEJ7EJIcHynbxw%3D&reserved=0>
Archive: http://www.team.net/pipermail/triumphs<https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.team.net%2Fpipermail%2Ftriumphs&data=02%7C01%7Cetd%40psu.edu%7C5107e1710e51475fa17308d7b3cf2474%7C7cf48d453ddb4389a9c1c115526eb52e%7C0%7C0%7C637175574560854589&sdata=Xrgg2raPHaVZjj7nFmazOl65bSb8upzG0CnaLKiA%2BPg%3D&reserved=0>  http://www.team.net/archive<https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.team.net%2Farchive&data=02%7C01%7Cetd%40psu.edu%7C5107e1710e51475fa17308d7b3cf2474%7C7cf48d453ddb4389a9c1c115526eb52e%7C0%7C0%7C637175574560864551&sdata=Jhn%2B9QBQItcTZnBPYMbynRG2gXe%2Fvr3kEt6KE7D%2BsAM%3D&reserved=0>

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/don.hiscock@gmail.com<https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fautox.team.net%2Fmailman%2Foptions%2Ftriumphs%2Fdon.hiscock%40gmail.com&data=02%7C01%7Cetd%40psu.edu%7C5107e1710e51475fa17308d7b3cf2474%7C7cf48d453ddb4389a9c1c115526eb52e%7C0%7C0%7C637175574560864551&sdata=9Fe2R%2FZAIyBS9ecrCxNjYplw2VuE8Np91zXxAeEWLQ0%3D&reserved=0>
________________________________
From: Triumphs <triumphs-bounces at autox.team.net> on behalf of Don Hiscock <don.hiscock at gmail.com>
Sent: Monday, February 17, 2020 12:30:39 PM
To: Jim Henningsen <trguy75 at gmail.com>
Cc: Triumphs <Triumphs at autox.team.net>
Subject: Re: [TR] TR4 Hood Badge

The badge mounting holes on the apron currently on my TR3B (not the original, which was upgraded to this one thirty five years ago) are slightly out of round.  The original style inserts would never have worked.  For a few years I had the flat spring speed nuts on the mounting posts, and the badge was tight with no movement.  But I hate those things.

A few years ago I threaded (carefully) with a die the posts on my reproduction badge and it's now mounted with nyloc nuts and plastic washers.  It accomodates the slightly out-of-round holes quite well.  I'm very happy with this approach and would recommend it for anyone who thinks it might make sense for their car.

Don
Saint Louis
1962 TR3B

On Mon, Feb 17, 2020 at 10:08 AM Jim Henningsen <trguy75 at gmail.com<mailto:trguy75 at gmail.com>> wrote:
Ordered a new enameled hood badge as the body shop had tried to bend it to
fit the holes and cracked the enamel.  The holes on my 62 TR4 hood are not
quite matching up with the aftermarket hood badges.  This one is from
England.  Any thoughts on fixing this before I experiment.  Badges ae too
expensive to try and bend the mounting tips.  I am thinking I need to shave
one of the holes on a top or bottom side to increase length between holes. I
know this may allow badge to shift after install, but what options are
there?
Thanks
Jim Henningsen
Ocala FL
61 TR3A
62 TR4
75 TR6
81 TR8


** triumphs at autox.team.net<mailto:triumphs at autox.team.net> **

Donate: http://www.team.net/donate.html<https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.team.net%2Fdonate.html&data=02%7C01%7Cetd%40psu.edu%7C5107e1710e51475fa17308d7b3cf2474%7C7cf48d453ddb4389a9c1c115526eb52e%7C0%7C0%7C637175574560854589&sdata=AZmPspfO2b1VCNj6YYd3nGg6PBsMMWEJ7EJIcHynbxw%3D&reserved=0>
Archive: http://www.team.net/pipermail/triumphs<https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.team.net%2Fpipermail%2Ftriumphs&data=02%7C01%7Cetd%40psu.edu%7C5107e1710e51475fa17308d7b3cf2474%7C7cf48d453ddb4389a9c1c115526eb52e%7C0%7C0%7C637175574560854589&sdata=Xrgg2raPHaVZjj7nFmazOl65bSb8upzG0CnaLKiA%2BPg%3D&reserved=0>  http://www.team.net/archive<https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.team.net%2Farchive&data=02%7C01%7Cetd%40psu.edu%7C5107e1710e51475fa17308d7b3cf2474%7C7cf48d453ddb4389a9c1c115526eb52e%7C0%7C0%7C637175574560864551&sdata=Jhn%2B9QBQItcTZnBPYMbynRG2gXe%2Fvr3kEt6KE7D%2BsAM%3D&reserved=0>

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/don.hiscock@gmail.com<https://nam01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fautox.team.net%2Fmailman%2Foptions%2Ftriumphs%2Fdon.hiscock%40gmail.com&data=02%7C01%7Cetd%40psu.edu%7C5107e1710e51475fa17308d7b3cf2474%7C7cf48d453ddb4389a9c1c115526eb52e%7C0%7C0%7C637175574560864551&sdata=9Fe2R%2FZAIyBS9ecrCxNjYplw2VuE8Np91zXxAeEWLQ0%3D&reserved=0>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200217/096bc6e0/attachment.htm>


More information about the Triumphs mailing list