[TR] clutch for pin

[Keith Stewart]

Same here:

The pin



 

The install:



 

 

Keith Stewart

keithstewart at bell.net

 

 

 

 

I did what Randall suggested when I changed my clutch.  I put it back together with a high strength pin to properly located the fork then drilled a 1/4" hole through the fork and shaft.  I then got a bolt with a shoulder long enough to go almost completely through the fork, so no threads were against the shaft.  I then drilled the nut/bolt and put a section of safety wire through it to make sure it stays.

 

Brian

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200208/4bc9182e/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 110197 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200208/4bc9182e/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 97556 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200208/4bc9182e/attachment-0001.jpg>