[TR] Pertronix Question

[Roger Elliott]

The instruction sheet I found has this:

    Q. What type of coil do I need?
    A. The ignitor is compatible only with a “points type” coil. Eight
    cylinder engines require a minimum of 1.5 Ohms of resistance in the
    primary circuit. Four & six cylinder engines require a minimum of
    3.0 Ohms of primary resistance

So, it sounds like the 3.0 Ohm.

Link to instrucations: 
https://cdn.shopify.com/s/files/1/0247/6913/4628/files/LU-142A.pdf

Roger

On 12/28/2020 3:58 PM, Jim Henningsen wrote:
> Anyone know if we should be using a 1.5 ohm or 3.0 ohm flame thrower coil
> with the LU-142A pertronix ignitor?  1967 Triumph TR4A.
> Thanks,
> Jim Henningsen
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/elliottr@rmi.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20201228/a28fed17/attachment.htm>