[TR] Vacuum Advance

[Bill Beecher]

Thank all for your response, time to go shopping again.  Looks like a pretty straightforward swap out.  
All the best,
Bill B

#dontkillgrandma

On Dec 23, 2020, at 7:52 AM, Bob Nogueira <nogera at hotmail.com> wrote:

 Yes, and it should be able to hold it  in a the advanced position until the vacuum is released.

Merry Christmas Bill 

Bob Nogueira 

> On Dec 22, 2020, at 1:47 PM, bill beecher <bill_beecher at flash.net> wrote:
> 
> 
> I think I should know this but just to confirm, if I connect my Mityvac to the vacuum advance unit on the Lucas DM6 distributor is should fully move the point plate, right?
> Thx,
> Bill
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/nogera@hotmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20201223/4d5229b9/attachment-0001.htm>