[TR] TR6 Switch Plinth

Tom Walling pdqtr6 at comcast.net
Mon Dec 21 14:26:20 MST 2020


Another option is to use one of the 2 braces that go from the bottom of the dashboard to the firewall. I have a double outlet power soutles (formerly a cigar lighter) attached to the one on the passenger side. Very easy, non-destructive solution.

>     On 12/21/2020 2:35 PM keithstewart at bell.net wrote:
>      
>      
> 
>     … or in the bottom of the ashtray.
> 
>      
> 
>     Keith
> 
>      
> 
>     From: DAVID MASSEY <dave1massey at cs.com>
>     Sent: December 21, 2020 12:13 PM
>     To: dconnitt at fuse.net
>     Cc: italyfound at gmail.com; triumphs at autox.team.net
>     Subject: Re: [TR] TR6 Switch Plinth
> 
>      
> 
>     I made a bracket that mounts to the two screws that attaches the stabilizing strut to the bottom of the dash.  I have two ports under there, one switched and one powered all the time.  Easily accessed yet still not in the way.
> 
>      
> 
>     Another idea is mount it IN the glove box.  This way you can leave your phone on charge all within your locked glove box and out of sight.
> 
>      
> 
>     Dave
> 
>      
> 
>      
> 
>     -----Original Message-----
>     From: Dave Connitt <dconnitt at fuse.net mailto:dconnitt at fuse.net >
>     To: DAVID MASSEY <dave1massey at cs.com mailto:dave1massey at cs.com >
>     Cc: italyfound at gmail.com mailto:italyfound at gmail.com ; triumphs at autox.team.net mailto:triumphs at autox.team.net
>     Sent: Mon, Dec 21, 2020 11:00 am
>     Subject: Re: [TR] TR6 Switch Plinth
> 
>     Hi Alex,
> 
>     Here is another mounting option. O’Reilly’s sells a USB receptacle that comes with a mounting bracket tha allows you to mount it to the bottom of your cardboard glove box 
> 
>     . It is pretty unobtrusive but still completely accessible and it was only about $15.00 as I remember. That way you don’t have to screw around with your switch plinth. If you are interested, I can send you a picture. I just wired it into the switched 12 bolts.
> 
>     Dave Connitt
> 
>     Sent from my iPhone
> 
> 
> 
>         > > 
> >         On Dec 21, 2020, at 11:49 AM, DAVID MASSEY <dave1massey at cs.com mailto:dave1massey at cs.com > wrote:
> > 
> >     > 
>         > > 
> >          
> > 
> >         Some models had the ignition switch located on the plinth.  US standards dictated the use of the steering lock as an anti-theft device freeing up that fifth position.  Feel free to mount your power port there if you have no plans of changing back to the plinth mounted ignition switch. 
> > 
> >          
> > 
> >         Dave
> > 
> >          
> > 
> >          
> > 
> >         -----Original Message-----
> >         From: Alex <italyfound at gmail.com mailto:italyfound at gmail.com >
> >         To: Triumphs at autox.team.net mailto:Triumphs at autox.team.net <Triumphs at autox.team.net mailto:Triumphs at autox.team.net >
> >         Sent: Mon, Dec 21, 2020 10:28 am
> >         Subject: [TR] TR6 Switch Plinth
> > 
> >         Hello All…firstly…Happy Holidays to all…….
> > 
> >          
> > 
> >         Quick question on a 1972 TR6 switch plinth……
> > 
> >          
> > 
> >         The 1969 plinth has five holes…the 1970 and on have 4 holes with a space between 2 & 4 switch.
> > 
> >          
> > 
> >         My question is I am looking to install a USB charging port on my 1972. It appears there is adequate space dead center on the plinth between the switches where this USB port can go. Does anyone know if the 5th hole is still there whereupon Triumph used the same plinth but avoided using the center hole. It would be nice to just “punch out” the existing hole spot if it is still there as opposed to having to drill a hole about 1” in diameter to accommodate the USB switch.
> > 
> >          
> > 
> >         Any help or advised welcomed……
> > 
> >          
> > 
> >         Alex Manzo
> > 
> >          
> > 
> >          
> > 
> >         ** triumphs at autox.team.net mailto:triumphs at autox.team.net **
> > 
> >         Donate: http://www.team.net/donate.html
> >         Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> > 
> >         Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dconnitt@fuse.net
> > 
> >     >     ** triumphs at autox.team.net **
> 
>     Donate: http://www.team.net/donate.html
>     Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
> 
>     Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/pdqtr6@comcast.net
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20201221/75bc77d5/attachment.htm>


More information about the Triumphs mailing list