[TR] TR6 bonnet release

[DAVID MASSEY]

 It's been said that if you poke a long screwdriver through the grommet for the harness that passes through the firewall between the heater and the glove box (LHD cars) you can engage the release lever and open the bonnet.  Be careful not to engage the battery hot cable.  

I have not tried this so I can't vouch as to how well this works.  But I did a quick inspection of my car and it is feasible.
 
Dave 

 
 
-----Original Message-----
From: David P <frogeye at porterscustom.com>
To: Triumphs (triumphs at autox.team.net) <triumphs at autox.team.net>
Sent: Sun, Dec 13, 2020 4:15 pm
Subject: [TR] TR6 bonnet release

Dash cable inop.. Damn! Any one with an answer as to how to open the 
bonnet? No, no emergency cable fitted.. DaveP

-- 
Porter Custom Bicycles 2909 Arno St. NE Albuquerque, NM. 505-352-1378 My World go here: WWW.PORTERBIKES.COM/


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20201213/0fa96aec/attachment.htm>