[TR] TR4A upper wishbone bushing choices

[Jim Henningsen]

Two piece poly. Easy install.  Need to do the same on my 4a. CTC72218L0
Jim Henningsen 

> On Aug 27, 2020, at 9:30 PM, Greg <greg at gregoryd.com> wrote:
> 
> 
> Greetings,
>  
> This concerns the front suspension of my ‘67 TR4A.
>  
> The bushings that go over the upper fulcrum pin and support the upper wishbone need replacing, something I’ve never done.
>  
> I’m wondering if anyone has an opinion on the best replacement bushing to use.
>  
> I’m referring to item 4:
>  
> <image001.png>
>  
> Moss offers a selection of replacements: one rubber, three polyurethane. The more expensive poly is a “one piece” bushing, while the rest are two pieces.
>  
> Two-piece poly:
>  
> <image002.png>
>  
> One-piece poly:
>  
> <image003.png>
>  
> I’m interested in opinions on:
>  
> 1: poly vs. rubber
> 2: one-piece vs. two-piece
> 3: anything else you think might help, like is there something I should probably also look at replacing while doing this work?
>  
> Thank you,
>  
> Greg
>  
>  
>  
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/trguy75@gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200827/30ab7351/attachment.htm>