[TR] Hoses to carbon canister for Triumphs similar to that used on a TR6

[John Macartney]

I’d have thought these were available through Mike Coffee of Triumph Stag Club USA.

JONMAC

At the Battle of Waterloo, 1815:
Lord Uxbridge:  “By God, Sir - I’ve lost my leg”
Duke of Wellington: “By God, Sir - so you have!”


> On 26 Aug 2020, at 17:23, DAVID MASSEY <dave1massey at cs.com> wrote:
> 
> If you can't find it you can get some barbed right-angle fittings and make the sharp turns using those.
> 
> Dave 
> 
> 
> 
> -----Original Message-----
> From: Sujit Roy <triumphstag at gmail.com>
> To: Triumphs <triumphs at autox.team.net>
> Sent: Wed, Aug 26, 2020 11:13 am
> Subject: [TR] Hoses to carbon canister for Triumphs similar to that used on a TR6
> 
> I need to get some hoses for my Stag. I don't think they are available. 
> This is from a TR6 and the hoses are similar to hoses 27 and 29.
> The canister in the Stag sits quite high under the hood  and I'd like to get preformed 90 degree angled hoses. Are the hoses for the TR6 performed? If so, then TRF probably has the correct ones. Can someone confirm?
> 
> Regards, Sujit 
> 
> 
> 
> <canister.jpeg>
> 
> 
> -- 
> Sujit Roy
> Cupertino, California
> 
> https://triumphstagblog.wordpress.com/
> 
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
> <canister.jpeg>
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/john.macartney@ukpips.org.uk
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200826/8c816171/attachment.htm>