[TR] [NET] Oil Pan Gasket

[David Friedlander]

Not sure why the gasket would "squeeze out" any more than
on any other vehicle. Fel-Pro makes rubber oil pan gaskets
and I've written to them because they have all sorts of
makes and models (even some LBC's!) in their drop-down
list but not Triumph!

See https://www.felpro.com/parts/performance/oil-pan-gaskets.html

Dave

On Sun, Aug 23, 2020 at 8:49 PM Phil Gott <vfracing at aol.com> wrote:

> Joe Alexander at GasketInnovations. Com has one under development. I’m not
> sure of the status but you could check.  The last I saw, they were trying
> to incorporate some standoffs around the bolt holes to keep the gasket from
> squeezing out.
> Phil Gott
>
> Sent from my iPhone
>
> On Aug 23, 2020, at 5:49 PM, David Friedlander via NET <
> net at newenglandtriumphs.org> wrote:
>
> 
> Hey all ~
>
> Does anyone know if there is such a thing as a silicone oil pan gasket
> for a TR? My TR3 could sure use one -- I'm tired of fussing with
> hammering-out dimples and such from overtightened bolts on the
> oil pan and thinking a silicone gasket might be just the ticket.
>
> Dave
> _______________________________________________
> NET mailing list
> NET at newenglandtriumphs.org
> http://newenglandtriumphs.org/mailman/listinfo/net_newenglandtriumphs.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20200823/d6b9bfcb/attachment.htm>