[TR] TR4 Fuel Delivery Issue & Mod

[Chris Kantarjiev]

It's been literally decades since I played with a mechanical pump on my 
TR4A (for me, the decision point to convert to electric was when the 
shaft came loose and the cam follower fell into the engine), but I 
recall that the hard line fittings to the pump are bubble flares - which 
means that the seal comes not from the threads, but from the interface 
between the flare at the end of the pipe and seat machined into the pump.

So pipe dope and tape aren't going to help you at all.

As to electric pumps, they definitely prefer to push rather than pull. 
They also like to be cool. Kas's Comp Prep book indicates that they 
factory team mounted the electric pump inside the driver's side rear 
wheel well, on the vertical panel of the "rear seat". That's where I 
mounted mine, with vibration mounts (and a cut-out switch under the 
steering column), and it was easy to patch into the fuel line with two 
lengths of rubber hose.

I made a blanking plate for the original fuel pump location, but a lot 
of people remove the guts of the pump and let fuel flow through (and if 
you have a glass bowl, that lets you see if fuel is flowing).