[TR] Buggers. I give up!

TERRY SMITH terryrs at comcast.net
Tue Apr 7 18:50:39 MDT 2020


Ahah!  I see them now.  Three little inset screws.  TOok them out and the control head pulls away.  Tomorrow I'll disconnect the wires, attach them to a steel wire so's to have a way to draw the new wiring harnes through the column, and pull the thing out.  

Thank you, everyone.

Terry


> On April 7, 2020 at 7:59 PM Randall <TR3driver at ca.rr.com> wrote:
> 
> 
> Check on the back of the hub; I think there should be at least one (and
> maybe 2 or 3) set screws in the hub that lock the control head to the wheel.
> 
> There's a photo at https://is.gd/cF9ux0 that shows the head of the screw
> plus another at https://is.gd/j7zogA that shows how the screw comes out
> inside the hub.
> 
> -- Randall 
> 56 TR3 TS13571L once and future daily driver
> 71 Stag LE1473 - awaiting engine rebuild
> 71-2-3 Stag - awaiting gearbox rebuild 
> 
> 
> > I replaced the stock steering wheel with a MotoLita and their 
> > adapter kit.  In fact, my dash and cockpit looks pretty much 
> > like they show on page 67 of their TR3 Glove Box Companion. 
> > 
> > I know I put them on the car, because...well...they're on the car. 
> > 
> > I can't for the life of me remember how they went on, hence 
> > how to get the friggin' thing off so's to swap out the 
> > control head when the new one comes in. 
> > 
> > Anybody remember?   
> > 
> > Terry Smith, '59 TR3A  TS58667
> > New Hampshire 
> > 
> > 
> 
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/terryrs@comcast.net


More information about the Triumphs mailing list