[TR] TR4A Body to Frame Attachment

[Cliff Hansen]

The part number is associated with that item in the TR6 catalog, that’s all the data I have. Never seen that part of a TR6 personally.


Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

________________________________
From: Keith Stewart <keithstewart at bell.net>
Sent: Tuesday, October 22, 2019 7:22:10 PM
To: 'Cliff Hansen' <cliff_hansen at outlook.com>; 'Greg Lemon' <grglmn at gmail.com>
Cc: 'Triumphs' <triumphs at autox.team.net>
Subject: RE: [TR] TR4A Body to Frame Attachment


The Greenbook FA24 shows as square in the drawing and the ones I have are definitely rectangular as shown in the photos I attached. The Rimmer’s part #68 is the second photo I attached when I pointed out that it is not included in the mounting kits at TRF or Moss but is included at Rimmers (out of stock) and Moss UK (available). I can make a guess as far as orientation but a photo sure would be helpful.



Keith



From: Cliff Hansen <cliff_hansen at outlook.com>
Sent: October 22, 2019 9:05 PM
To: Greg Lemon <grglmn at gmail.com>; Keith Stewart <keithstewart at bell.net>
Cc: Triumphs <triumphs at autox.team.net>
Subject: RE: [TR] TR4A Body to Frame Attachment





http://trf.zeni.net/TR6greenbook/40.php?s_wt=1920&s_ht=1080#FA24   It’s a “reinforcing plate” for a TR6, not too surprised that you found them on a TR4A.



Rimmer’s sells it for that mounting point:



https://rimmerbros.com/Item--i-GRID200679  part number 68



Cliff


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20191023/92d954d0/attachment.htm>