[TR] any TR7 folks put on a clyinder head using ARP bolt kit?

[Sujit Roy]

I'm installing a head on a Stag using an ARP cylinder head kit for a
TR7.Someone on the Stag list mentioned if using the provided lube, that the
clamping load should be reduced by about 15% from what the Stags ROM says.
The Stag ROM says to install studs and bolts dry and to clamp everything
down to about 55 lbs / inch Anyone agree with this?

Also, they mentioned since the clamping load is different because the studs
go in at an angle to the head and not perpendicular, The bolts should be
torqued down less than mentioned in the ROM.

Any thoughts

Sujit

-- 
Sujit Roy
Cupertino, California

https://triumphstagblog.wordpress.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20191017/356f69c2/attachment.htm>