[TR] Triumph TR6 Trunk Badge Removal

Stan Foster stan at redtr6.com
Fri Mar 22 11:16:53 MDT 2019


The pins on the badge are an interference fit into the plastic inserts. Just use a wide flat blade behind the badge at each end and gently ease the badge off the rear valence. There are non-marring tools designed for this if you are paranoid but if the badge yields to some gently prying you should be fine.

Stan 

-----Original Message-----
From: Triumphs <triumphs-bounces at autox.team.net> On Behalf Of Rochlin Robert
Sent: Friday, March 22, 2019 11:44 AM
To: Triumphs (triumphs at autox.team.net) <triumphs at autox.team.net>
Subject: [TR] Triumph TR6 Trunk Badge Removal

	I would like to remove the Triumph badge from my trunk lid and add the overdrive badge to it. The badge is held in place by two plastic caps that slip over the badge locating pins. I can’t see how the badge can be removed except by prying the badge off from the body side, kind of insuring the badge (and possibly the paint) is destroyed in the process.  If anyone has successfully removed this badge could you tell me how it was done?  
	Best,
	Bob
	’72 TR6
	
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/stan@redtr6.com


More information about the Triumphs mailing list