[TR] Stag bellhousing dowel pin

[Sujit Roy]

Thx.

On Sun, Mar 3, 2019, 1:35 PM Frank Magnusson <fmags at cox.net> wrote:

> Don't recall, but I don't think it was more than $100.
>
> Sent from my iPad
>
> On Mar 3, 2019, at 1:48 PM, Sujit Roy <triumphstag at gmail.com> wrote:
>
> Great. How much did u pay your machine shop.
>
> On Sat, Mar 2, 2019, 12:14 PM Frank Magnusson <fmags at cox.net> wrote:
>
>> Hi Sujit,
>>
>> I was working on the Stag today and came across one of the dowel pins we
>> were talking about recently.  This is one of the unmodified dowel pins that
>> the machinist started with. He milled down the diameter of the shoulder to
>> fit the holes in the bellhousing and I believe he shortened it as well and
>> recut the threads.  Allen key needed on the head.  Worked very well.
>>
>>
>>
>>
>>
>> Frank
>>
>> Sent from my iPad
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20190312/a7fbd50d/attachment.html>