[TR] Stag bellhousing dowel pin

[Frank Magnusson]

Hi Sujit,

I was working on the Stag today and came across one of the dowel pins we were talking about recently.  This is one of the unmodified dowel pins that the machinist started with. He milled down the diameter of the shoulder to fit the holes in the bellhousing and I believe he shortened it as well and recut the threads.  Allen key needed on the head.  Worked very well.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: image1.JPG
Type: image/jpeg
Size: 133620 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20190302/478a82fa/attachment.jpe>
-------------- next part --------------


-------------- next part --------------
A non-text attachment was scrubbed...
Name: image2.JPG
Type: image/jpeg
Size: 111339 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20190302/478a82fa/attachment-0001.jpe>
-------------- next part --------------


Frank

Sent from my iPad