[TR] Valvecover issue

[Wbeech@flash.net]

They are getting rather pricy too!   My job has been at a shop in Utah for four months now, I keep being told “next week”.   Getting nervous.  

Going to try Spacecoast next.  

Bill 

Sent from my DynaTAC 8000X

On Feb 2, 2019, at 5:24 PM, dave <dave at ranteer.com> wrote:

Chrome shops are becoming harder and harder to find!
 
From: Triumphs <triumphs-bounces at autox.team.net> On Behalf Of Carl-TR
Sent: Saturday, February 2, 2019 2:23 PM
To: James Henningsen <trguy75 at gmail.com>; Triumph Mail List <triumphs at autox.team.net>
Subject: Re: [TR] Valvecover issue
 
Spacecoast did my rechrome work as well.  100% recommend.

Sent from BlueMail
On Feb 2, 2019, at 3:26 AM, James Henningsen <trguy75 at gmail.com> wrote:
Space coast plating in Melbourne Florida.  Mailed it to them and got all bits back in great condition 
Jim

Sent from my iPhone
 On Feb 1, 2019, at 5:45 PM, rbtr3a at cox.net wrote:
 
 Jim who did you use for the rechroming 
 
 Ronnie
 
 On Feb 1, 2019, at 6:22 AM, James Henningsen <trguy75 at gmail.com> wrote:
 
 That seems to be the easiest manner.  I do t have a pipe expander and do t want to damage the original push on cap.  I’ll tape off and try Grinding this weekend.  Thanks all for comments 
 Jim 
 
 Sent from my iPhone
 
 On Jan 31, 2019, at 6:47 PM, Stan Foster <stan at redtr6.com> wrote:
 
 I had that exact problem with my TR3. I ended up removing the chrome from the end of the tube to allow the cap to slide on. I figured that end would always be under the cap and covered with oil anyway.
 
 Stan
 
 -----Original Message-----
 From: Triumphs <triumphs-bounces at autox.team.net> On Behalf Of James Henningsen
 Sent: Thursday, January 31, 2019 3:24 PM
 To: triumphs at autox.team.net
 Subject: [TR] Valvecover issue
 
 Team:
 Had my valve cover rechromed.  Looks great.  Only problem is the extra thickness on the oil filler tube from new chrome now will not let me slip on my push on oil filler vent cap.  His is an early 4 with similar setup to TR3. Any ideas on what to do.  I heard I’d have to take valve cover to chrome plater to have hem strip a bit off the surface.  Another though was a muffler shop that has a pipe expanding that fits he 1 1/2 inch diameter opening of the push on cap.  Any help much appreciated Jim Henningsen Ocala FL
 61 TR3A
 62 Tr4 
 
 Sent from my iPhone
 ** triumphs at autox.team.net **
 
 Donate: http://www.team.net/donate.html
 Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
 
 Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/stan@redtr6.com
 ** triumphs at autox.team.net **
 
 Donate: http://www.team.net/donate.html
 Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive
 
 Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/rbtr3a@cox.net
 
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/cfmtr3a@verizon.net
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/wbeech@flash.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20190202/d9c3e696/attachment.html>