[TR] Valvecover issue

[James Henningsen]

Thanks.  I’m on it this weekend.  

Sent from my iPhone

> On Feb 1, 2019, at 7:43 AM, Thomas Fansher <tfansher at comcast.net> wrote:
> 
> I ground mine down
> Tom
> 
> Sent from my iPhone
> 
>> On Jan 31, 2019, at 6:47 PM, Stan Foster <stan at redtr6.com> wrote:
>> 
>> I had that exact problem with my TR3. I ended up removing the chrome from the end of the tube to allow the cap to slide on. I figured that end would always be under the cap and covered with oil anyway.
>> 
>> Stan
>> 
>> -----Original Message-----
>> From: Triumphs <triumphs-bounces at autox.team.net> On Behalf Of James Henningsen
>> Sent: Thursday, January 31, 2019 3:24 PM
>> To: triumphs at autox.team.net
>> Subject: [TR] Valvecover issue
>> 
>> Team:
>> Had my valve cover rechromed.  Looks great.  Only problem is the extra thickness on the oil filler tube from new chrome now will not let me slip on my push on oil filler vent cap.  His is an early 4 with similar setup to TR3. Any ideas on what to do.  I heard I’d have to take valve cover to chrome plater to have hem strip a bit off the surface.  Another though was a muffler shop that has a pipe expanding that fits he 1 1/2 inch diameter opening of the push on cap.  Any help much appreciated Jim Henningsen Ocala FL
>> 61 TR3A
>> 62 Tr4 
>> 
>> Sent from my iPhone
>> ** triumphs at autox.team.net **
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
>> 
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/stan@redtr6.com
>> ** triumphs at autox.team.net **
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
>> 
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/tfansher@comcast.net
>