[TR] Triple Weber Carbs on a TR6

[Stan Foster]

I think my setup is typical for a LHD car. The standard TR6 accelerator shaft and lever is connected via a rod to a bell crank that is attached under the manifold in the middle. The vertical rod from that bell crank is arrowed in the attached picture and the rest should be self explanatory.

Stan

-----Original Message-----
From: Triumphs <triumphs-bounces at autox.team.net> On Behalf Of Joe DeMuth
Sent: Saturday, August 31, 2019 3:31 PM
To: triumphs at autox.team.net
Subject: [TR] Triple Weber Carbs on a TR6

I currently have duel carbs but want to fit triples. I know I will need a new input manifold, no problem, but I am puzzled by what the accelerator linkage will like. That middle carb will be occupying the same space as the current linkage and will need to be modified, or replaced with something different.

Has anybody done this, and if so could you send a picture of the linkage?  Thanks.

Sent from my couch
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive

Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/stan@redtr6.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20190831_163710.jpg
Type: image/jpeg
Size: 3632177 bytes
Desc: 20190831_163710.jpg
URL: <http://autox.team.net/pipermail/triumphs/attachments/20190831/f0132060/attachment-0001.jpg>