[TR] [NET] TR3A Voltage Regulator photos needed

[David Friedlander]

Anthony;

It was easier for me to just jumper A, A1, and F together as they are right
next to each other. I just wanted to see a photo of someone's wired-up
control box who had also jumpeted ot for use with an alternator.

Dave

On Fri, Aug 16, 2019, 2:32 PM Anthony Rhodes <spamiam at comcast.net> wrote:

> You must jump D, A1, A2 all together.  D is the dynamo output.  A1 and A2
> are feeds to the battery and the rest of the car.
>
> You will need to run the warning light to the appropriate terminal on the
> alternator.
>
> -Tony
>
> Sent from my 1837 Babbage Analytical Engine
>
> On Aug 16, 2019, at 10:22 AM, David Friedlander via NET <
> net at newenglandtriumphs.org> wrote:
>
> Hello all ~
>
> Is there, by some chance, anyone out there with a photo or two of their
> Lucar-termial voltage regulator box (gutted and jumpered for use with an
> alternator) and completely wired/operational? I just need to verify my
> connections and pictures help a lot!  :- )
>
>
> *Thank all!*
> Dave Friedlander
>
> _______________________________________________
> NET mailing list
> NET at newenglandtriumphs.org
> http://newenglandtriumphs.org/mailman/listinfo/net_newenglandtriumphs.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20190816/4b257fd0/attachment.html>