[TR] Flywheel locating peg

[Dave]

Only one is used in factory stock form.  Having two is added piece of mind, but not required.  Balancing all rotating parts during a rebuild is nice too, but also not required.  
Dave H.

Sent from my iPad

> On Apr 9, 2019, at 2:48 PM, Bob Nogueira <nogera at hotmail.com> wrote:
> 
> My TR4 crankshaft, back from the machine shop, has only one locating peg  but both the crank and flywheel have two peg holes.  Checking the Moss Catalog says “qty required” one.
> Whose right, my crank and flywheel or Moss?
> 
> Bob Nogueira 
> 
> Bob Nogueira 
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dlhogye@comcast.net