[TR] slightly higher sitting nut?

[Paul Dorsey]

It doesn't really bother me, but I've noticed something odd about my
engine;  Of course there are four 9/16" nuts holding the rocker arm to the
head.  Initially all 4 nuts were tight, however, nut #4 (rear nut) was two
or three threads higher on it's stud.  It's okay that it's higher, right?
In time, I intend on finding the torque value for all four nuts.  Is this
listed in the workshop manual?

Thanks, Paul Dorsey
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20180924/3b7fd271/attachment.html>