[TR] SU H6 Carb Part Need

[James Henningsen]

I had heard that also.   But also heard that over the years one can’t verify if the set is still the factory matched set.  John twist from university motors said a while back he never had a problem switching parts and checking tolerances.  I defer to the carb expert rebuilders out there. Jim

Sent from my iPhone

> On Sep 17, 2018, at 9:10 PM, Tony Drews <tony at tonydrews.com> wrote:
> 
> Normally the dome and piston is a matched set.  Mixing them up can cause much havoc.
> 
> Tony
> 
> 
>> On 9/17/2018 2:49 PM, Kinderlehrer wrote:
>> Did you try switching the domes and see if the problem follows the dome or
>> the piston?
>> Bob
>> 
>> -----Original Message-----
>> From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of Jim
>> Henningsen
>> Sent: Sunday, September 16, 2018 5:25 PM
>> To: 'Triumphs'
>> Subject: [TR] SU H6 Carb Part Need
>> 
>> Anyone have a spare SU H6 piston dome? Carbs on my 61 TR3A.  I believe I may
>> need another as the tolerance is too tight to get the piston to move up and
>> down easily and get the audible click. If you have one, please contact me
>> directly.
>> Thanks,
>> Jim Henningsen
>> 
>> ** triumphs at autox.team.net **
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
>> 
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/triumphs/kinderlehrer@comcast.net
>> 
>> ** triumphs at autox.team.net **
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
>> 
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/tony@tonydrews.com
>> 
> 
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs  http://www.team.net/archive
> 
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/trguy75@gmail.com