[TR] Does anyone know the diameter of the restriction in part

[Sujit Roy]

Hi Ed,
I'm assuming the outside diameter is 5/16" and would fit the hose from the
crankcase vent pipe . Can you please confirm?
Regards, Sujit

reagrds


On Sun, Sep 2, 2018 at 6:17 PM Alex & Janet Thomson <aljlthomson at charter.net>
wrote:

> Did miss the original note on this one?
>
> Alex Thomson
>
> -----Original Message-----
> From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of Q
> Sent: Saturday, September 01, 2018 10:27 AM
> To: triumphs at autox.team.net
> Subject: [TR] Does anyone know the diameter of the restriction in part
>
> It's about 3/16'.  You can get them from Rimmer's or TRF for about
> $5.00.  It fits a TR6 as well.
>
> Edward Hamer
> Petaluma CA
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/aljlthomson@charter.net
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/triumphstag@gmail.com
>


-- 
Sujit Roy
Cupertino, California

https://triumphstagblog.wordpress.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20180905/07cbd2b0/attachment.html>