[TR] 3-point seat belts (TR4, TR250)

[Keith Stewart]

Car is gone so I cannot get pictures but the retractor would be on the wheel
well behind the seat. Most seat belt kits come with the appropriate hardware
and my 62 TR4 which never had seat belts or three point belts came with
bolts already in place on the wheel well. Something similar to
https://www.pegasusautoracing.com/productselection.asp?Product=2383 should
be used so those large flat washers are on the underside of the body. 

 

The location on the wheel well is similar to what you might find on a TR6
like this:



 

Hope this helps.

 

 

Keith Stewart

keithstewart at bell.net

 

 

 

From: Andrew Uprichard <auprichard at uprichard.net> 
Sent: September 3, 2018 2:30 PM
To: 'Triumphs List' <triumphs at autox.team.net>; 6pack at autox.team.net
Subject: [TR] 3-point seat belts (TR4, TR250)

 

Some time ago I bought a 3-point seatbelt kit from TRF (part
TRFSB303/1000).  I was going to use them in a TR250, but in the meantime I
have completed the restoration of a TR4 and would like to use them in this
car.

 

The kit has a "stalk" which presumably attaches to the gearbox tunnel.  It
also has a floor fitting which I imagine goes somewhere around the bottom of
the B-post.  The pieces which I am having difficulty with are the recoil
part and the shoulder attachment.

 

Has anyone on the list fitted such a seat-belt and if so, can you share pics
of how and where you attached the various anchors?  Thanks !

Andrew Uprichard

Jackson, Michigan

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20180904/48149bd8/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 207623 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20180904/48149bd8/attachment.jpg>