[TR] TR6 blinker switch
TeriAnn J. Wakeman
tjwakeman at gmail.com
Sat Nov 24 11:19:48 MST 2018
On 11/24/18 10:44 AM, dave wrote:
> Here is a picture of the blinker switch wires on the wiring diagram.
> If i connect blue to red/green, i get connectivity with the switch in
> one position. In the other position i get no connectivity between
> the blue and any other wire. Is the switch bad? Can anyone tell me
> what the wires are for since i don't see the correlation between the
> diagram and the switch?
Does the switch double as a high beam dip switch? Your wiring diagram
doesn't seem to be for your year TR.
I have a 1960's wire colour use chart which may help.
Brown =always hot
Blue = direct feed from headlamp switch (usually goes to dip switch)
Blue/white usually provides power to high beams.
Brown/blue = power feed to the headlamp switch
Red/green = 4 way flasher circuit?
TeriAnn
--
Book - The Essential Guide to Overland Travel in the United States and
Canada <http://overlandtravel.us>
2 years to write and 38 years of travel and camping to learn what to write
*Because the world beckons and life waits for no one*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20181124/7d3246b3/attachment.html>
More information about the Triumphs
mailing list