[TR] (no subject)

Paul Dorsey dorpaul1 at gmail.com
Sun Nov 4 06:42:00 MST 2018


Bill, I must 'av said it wrong.  Valve #1 gets ADJUSTED because #8 is down
(or going down), and valve #6 is ADJUSTED because #3 is down(or going
down).  Honestly it seems I may not have to be at the very peak or zenith
of the #8 or #3, I think, because, they so rapidly 'fall-off' or change.
Am I still missing something?
Thanks, Paul Dorsey, TR3  1960

On Sat, Nov 3, 2018 at 10:22 PM Wbeech at flash.net <wbeech at flash.net> wrote:

> None at all because you are only adjusting the closed valves, 8&3.
> Bill
>
> Sent from my Handspring Treo
>
> On Nov 3, 2018, at 7:54 PM, Paul Dorsey <dorpaul1 at gmail.com> wrote:
>
> Sorry for the interlude as I was getting the house painted, but, I am now
> on the tr 3 again.  And I was adjusting the valves using the 'rule of 9',
> which seems simple enough.  AT TDC valve no.1 is adjusted because valve 8
> is descending, right?  Valve no. 6 is adjusted when valve 3 is open, That
> is 1+8=9 and 6+3=9, respectively right?  Well, how concerned should I be
> that valve 8 and valve 3 (in this example) are fully open?
>
>
> Thanks, Paul Dorsey, TR3  1960
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/pipermail/triumphs
> http://www.team.net/archive
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/wbeech@flash.net
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20181104/7a2e1ba7/attachment.html>


More information about the Triumphs mailing list