[TR] TR4 question

Wbeech@flash.net wbeech at flash.net
Sun Jul 15 16:56:49 MDT 2018


Good that you found it at home and not on a freeway ramp.   Looks like it to a pretty good lick. 
Bill

Sent from my Apple II+

On Jul 15, 2018, at 4:06 PM, Andrew Uprichard <auprichard at uprichard.net> wrote:

Thank you to all who replied.  I found a culprit - see pic.  Replaced it today and all is good.

Andrew Uprichard
Jackson, Michigan

-----Original Message-----
From: glemon at neb.rr.com [mailto:glemon at neb.rr.com] 
Sent: Saturday, July 14, 2018 11:43 AM
To: auprichard at uprichard.net; triumphs at autox.team.net; DAVID MASSEY
Subject: Re: [TR] TR4 question

I believe the TR4 has the rubber flex couplings in the steering shaft, I thought mine was fine when I restored my TR250, but eventually replaced it.  It made a noticeable difference in steering feel.

Looking at the TR4 diagram it has two of the rubber couplings, they are pretty cheap and easy to replace if not done with restoration.  Also replaced the steering column bushes which I would recommend as well if not done already, if the shaft moves in the column steering will feel sloppy.

Greg Lemon 
TR250

---- DAVID MASSEY  <dave1massey at cs.com> wrote: 
> 
> The first thing to check is the tightness of the rack mounting.  Open the hood and turn the wheel back and forth and watch to see if the rack itself moves back and forth.  If so that is your problem.  Usually is.
> 
> 
> If this is the problem you can tighten up the clamps.  There is a clamp plate under each clamp that has diagonal slots.  If you assemble the clamp loose enough that you can drift that plate for and aft you can tap that plate to push the clamp tight against the flange on the rack and remove all play.  Then tighten the nuts securely.
> 
> 
> One work about the flat washers used in this application.  If these are typical hardware store, grade 2  washers they will likely deform and the clamps will again become loose and will drift and the play will return.  Be sure to use good, SAE grade 5 or better flat washers for long term satisfaction.
> 
> 
> There are polyurethane bushes available for this to provide even tighter rack attachment.  Some use aluminum blocks here as well which I think are overkill for a street car.
> 
> 
> 
> Dave Massey
> 
> 
> 
> 
> 
> 
> -----Original Message-----
> From: Andrew Uprichard <auprichard at uprichard.net>
> To: 'Triumphs' <triumphs at autox.team.net>
> Sent: Sat, Jul 14, 2018 8:49 am
> Subject: [TR] TR4 question
> 
> 
> 
> TR4 owners:  is there any adjustment on the R&P steering on a TR4?  I have been driving the newly-restored car and I think there is a little too much slop in  the steering.
> 
> Any help would be great- thank you !
> 
> Andrew
> 
> 
> ** triumphs at autox.team.net **
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dave1massey@cs.com
> 

<20180715_142556.jpg>

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/wbeech@flash.net



More information about the Triumphs mailing list