[TR] Flywheel Bolts

[Allen Hess]

Another reason to use the correct bolt is that they have a shoulder that matches the thickness of the piece being bolted: flywheel, brake rotor, u-joints etc. 
Allen 
TR4 owned for fifty years 

Sent from my iPad

> On Feb 9, 2018, at 2:10 PM, Bill Beecher <bill_beecher at flash.net> wrote:
> 
> Good to know, thanks!
> 
> Sent from my Apple II+
> 
> On Feb 9, 2018, at 12:17 PM, Andrew Uprichard <auprichard at uprichard.net> wrote:
> 
> TRF sells correct length bolts which do not need the tab or washers.
>  
> Andrew
>  
> From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of Bill Beecher
> Sent: Friday, February 09, 2018 11:02 AM
> To: triumphs at autox.team.net
> Subject: [TR] Flywheel Bolts
>  
> Searching for the correct length of the TR3 flywheel attachment bolts.  Grade 8, 3/8” UNF, I am thinking 1” but don’t want to make a big mistake.  TR book calls the part number 102065, but no description.   In stead of the tabs I am thing that I will use a split ring washer and safety wire.
>  
> Thanks,
> Bill TS30800L
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20180211/3c71486f/attachment.html>