[TR] TR2/TR3 Seat pans & Wedge Side Curtains

[Hoyt Duff]

Any good sheet metal fabricator can duplicate the seat pans if they
have a pattern to go by. depending on the damage to the seat, it could
be repaired.

On 4/25/18, gandcanderson at comcast.net <gandcanderson at comcast.net> wrote:
> I'm currently restoring a 1955 TR2 and I'm in need of a pair of seat pans.
> Since the TR2 seat backs are slightly wider than the TR3s, I'd like to
> retain the TR2 backs from my seats for originality, but unfortunately the
> pans (bottoms) are shot. Does anyone know were I might be able to obtain a
> pair of either new TR2/TR3 seat pans or used pans in good condition? I could
> then weld the backs from my TR2 seats to the new/used seat pans. I've tried
> contacting TRF and Moss but neither are able to sell me just the pans.
>
> Additionally, I'm also looking for a pair of TR2/early TR3 "wedge" type side
> curtains that are in good enough condition for rebuilding. These would have
> to be the original type from Triumph and not the crappy after market types
> sold by JC Whitney.
>
> Any help locating either the seat pans or wedge side curtains would be
> greatly appricaited.
>
> Thank you,
> Glenn
>


-- 
-- 
Hoyt