[TR] Oil Slinger

[Andrew Uprichard]

Really?  Then I provided bad advice.  But the cars I have seen have always
had the slinger concave side out.

 

Andrew Uprichard

Jackson, Mi

 

From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of Tony
Drews
Sent: Thursday, September 28, 2017 1:46 PM
To: Bill Brewer; triumphs at autox.team.net
Subject: Re: [TR] Oil Slinger

 

Concave side in.  Outer ring has a larger gap between the sprocket and the
slinger.

Tony

At 07:34 AM 9/28/2017, Bill Brewer wrote:



Content-Type: multipart/alternative;
         boundary="----=_NextPart_000_01F5_01D3381B.710790B0"
Content-Language: en-us

     For the oil slinger at the front of the crankshaft, does it go in
concave side in or concave side out?
 
     -Bill Brewer

** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/tony@tonydrews.com 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20170928/51b9dea5/attachment.html>