[TR] TR3 Accelerator shaft bush

[Cliff Hansen]

In theory, yes. Getting it to slide off is a struggle. After soaking heating and repeating, once you get it to move a little I’d work over the accelerator shaft with a piece of scotchbrite.


Get Outlook for iOS<https://aka.ms/o0ukef>
________________________________
From: Triumphs <triumphs-bounces at autox.team.net> on behalf of David Friedlander <forzion7 at gmail.com>
Sent: Tuesday, October 31, 2017 3:01:31 PM
To: New England Triumphs; TR3 Triumphs
Subject: [TR] TR3 Accelerator shaft bush

Hello all;

Can item 20, the bushing on the pedal shaft, be moved off the shaft? The
piece isn't available from Moss and doesn't seem to want to budge. Not
sure how else to replace the nylon accelerator bearings... Yes, I have
already removed the bush-to-shaft pin (item 21). I'm currently soaking it
in Aerokroil in hopes... It's not a complex piece; not sure why Moss doesn't
stock it (or even list a part number for it!), if I mangle it while trying to
remove it...


[Inline image 1]

Thanks,

Dave Friedlander
TS42312L '59 TR3A
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20171101/c4d569bc/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 131841 bytes
Desc: image.png
URL: <http://autox.team.net/pipermail/triumphs/attachments/20171101/c4d569bc/attachment.png>