[TR] adding wire wheels

[Stan Foster]

  *   peened on the backside with little room to maneuver

That’s how I remember my childhood too.

Stan

From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of Geo Hahn
Sent: Monday, November 13, 2017 1:10 PM
To: Hoyt Duff <hoytduff at gmail.com>; Triumphs <triumphs at autox.team.net>
Subject: Re: [TR] adding wire wheels

On Mon, Nov 13, 2017 at 10:58 AM, Hoyt Duff <hoytduff at gmail.com<mailto:hoytduff at gmail.com>> wrote:

I haven't looked at the Triumph wheel lugs in years, but it can't be
difficult to replace them with the appropriate length studs...

The front ones should not be much trouble, but the rear ones are peened on the backside with little room to maneuver so may require separating the hub - and that is a PITA.

Geo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20171113/e28560f5/attachment.html>