[TR] TR-3 rear anti-sway bar

[Kinderlehrer]

Going back 20 years, ADDCO did make a TR3 bar, but JC Whitney didn't get the
memo. I too ordered from JC and got a bar long enough for a TR4. ADDCO
couldn't deal with me directly, as I recall, but made sure that one of their
outlets (not JC) got me the correct bar with mounting brackets, which I've
had installed ever since. BTW, I'm only talking about the front bar.

Bob


As a side comment, the kit I got from ADDCO first did not fit.  They had
only tried it on a TR4 and assumed the TR3 was the same.  When I contacted
them about it, they listened to my description of the problem and promptly
sent me the modified mounting brackets along with instructions on how to
bend the bar slightly.  I assume (but don't know) that they've solved the
problem by now, though.  (That was over 30 years back, my how time flies.)

FWIW, I actually bought both bars through JC Whitney.  You might check with
them, they might still offer any bar that ADDCO makes even though they don't
carry much else for TR3s these days.

-- Randall



** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/triumphs/kinderlehrer@comcast.net