[TR] TR-3 front anti-sway bar kit production run

[davehogye]

Excellent, Greg. 
All messages and photos came through on FoT and TR lists. 

Dave H. 

----- Original Message -----

From: "Greg Solow" <gregmogdoc at surfnetusa.com> 
To: "Friends of Triumph" <FOT at autox.team.net>, triumphs at autox.team.net 
Sent: Tuesday, November 7, 2017 1:53:32 AM 
Subject: [TR] TR-3 front anti-sway bar kit production run 

I just send out some pictures of the 7/8" front anti-sway bar kit installed on the 1957 small mouth TR-3 for which it was designed. Note that there is some minor crash damage to the very front ends of both chassis rails. This is crash damage and was not a modification to the frame in order to get the kit to fit! 
There is a small loss of ground clearance at the very front, I think it is less than 1". When the new shipment of kit arrives, I will install the first one on a 1960 TR-3, write up installation instructions and measure the loss of ground clearance. 
I still do not have a delivery date. As soon as I have one, I will let everyone know. 
Thanks for your interest, 
Greg Solow 
The Engine Room 
Morgan & Sports Car Specialists 
Santa Cruz, Calif. 95060 
831 429-1800 

	Virus-free. www.avast.com 


** triumphs at autox.team.net ** 

Donate: http://www.team.net/donate.html 
Archive: http://www.team.net/archive 
Forums: http://www.team.net/forums 
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/dlhogye@comcast.net 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20171107/d8f07493/attachment.html>