[TR] clutch fork pin

[Sujit Roy]

I could try that but wont the vise grips mar the pin?


Sujit

On Wed, Mar 29, 2017 at 5:25 AM, EDWARD WOODS <fogbro1 at comcast.net> wrote:

> I just grab them with a vise grip and rotate them w/o "unpeening" them.
>
> On March 29, 2017 at 1:26 AM Sujit Roy <triumphstag at gmail.com> wrote:
>
> I need to use an angle grinder to un peen them. So i will need new ones.
>
> Sujit
>
> On Tue, Mar 28, 2017 at 7:50 PM, EDWARD WOODS <fogbro1 at comcast.net> wrote:
>
> Or, just rotate them to an undamaged surface...
>
> On March 28, 2017 at 5:24 PM Allen Hess <allenhess at mgcarclub.com> wrote:
>
>
> The throwout bearing pins are peened to the fork. Grind off the peened
> side, punch them out. Insert new ones and peen.
>
> Allen
> *From:* Sujit Roy <triumphstag at gmail.com>
> *Sent:* Monday, March 27, 2017 4:07:27 PM
> *To:* Cliff Hansen
> *Subject:* Re: [TR] clutch fork pin
>
> the pins on the fork which hold the throwout bearing.
> Sujit
>
> On Mon, Mar 27, 2017 at 3:55 PM, Cliff Hansen <cliff_hansen at outlook.com
> > wrote:
>
> Do you mean the pins on the fork which hold the throwout bearing? Or the
> single pin which holds the fork to the shaft? If it's the latter (single
> pin) it's threaded, you don't need a press.
>
>
>
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/triumphs/fogbro1 at comcast.net
>
>
>
>
> --
> Sujit Roy
> Cupertino, California
>
> https://triumphstagblog.wordpress.com/
>
>


-- 
Sujit Roy
Cupertino, California

https://triumphstagblog.wordpress.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20170329/8dbf4887/attachment.html>