[TR] TR3 Rear Axle
James Henningsen
trguy75 at gmail.com
Thu Dec 28 19:07:42 MST 2017
Yes. That is the one. It is very tricky getting back on. I don’t see any hurts but will check again in morning. Almost got the car ready to get back on the road. Jim
Sent from my iPhone
> On Dec 28, 2017, at 9:01 PM, wbeech <wbeech at flash.net> wrote:
>
> Jim,
> I presume you are talking about what Moss describes at the Pinion
> Flange(674.250)? You just need to turn it left or right to align the
> splines and it should slip right on, be sure you are good and square to the
> shaft. I have this same job to do this weekend, received my new seal today.
> Bill
>
> -----Original Message-----
> From: Triumphs [mailto:triumphs-bounces at autox.team.net] On Behalf Of Jim
> Henningsen
> Sent: Thursday, December 28, 2017 4:29 PM
> To: triumphs at autox.team.net
> Subject: [TR] TR3 Rear Axle
>
> Is there a trick to getting the rear pinion yoke back on the pinion on a
> TR3A? I have put a new seal in and the yoke doesn't want to seat on the
> pinion and slide on.
> Thanks in advance,
> Jim Henningsen
> Ocala, FL
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/wbeech@flash.net
>
More information about the Triumphs
mailing list