[TR] TR3A Sway Bar (resent because exceeded size limit)

[CFM-TR]

Finally got the front sway bar installed. Kind of modified welding two bars
between the bumper extensions since everything was already powder coated.

 

Made a plate out of .25 aluminum and mounting bar mounts about 3 in from the
extensions so that they were parallel.

 

Attached are images of the assembled mounting plate both front and back as
well as the installed bar.

 

The hardest part was determining where to place the mounting holes for the
bar brackets. Also it would have been much easier to install prior to
putting the apron on. 

Hope this is helpful to someone



Carl 

1960 Triumph TR3

TS81802LO

Tampa, FL

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20171223/7b3ce440/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 11012 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20171223/7b3ce440/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20171221_162405.jpg
Type: image/jpeg
Size: 1117713 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20171223/7b3ce440/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20171221_162531.jpg
Type: image/jpeg
Size: 499701 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20171223/7b3ce440/attachment-0001.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20171223_115840.jpg
Type: image/jpeg
Size: 841889 bytes
Desc: not available
URL: <http://autox.team.net/pipermail/triumphs/attachments/20171223/7b3ce440/attachment-0002.jpg>