[TR] Fuel pump problems

[Chris Simo]

I mounted my facet pump over the fuel pump block off plate (Chevy plate
works) and minimal piping mods.

Pump mounting holes are very close to the plate.. i started with studs and
later switched to rubber mounts (I had some MG exhaust mounts laying
around).  While its not at the tank, it is less than 12 inches of lift.
Big filter in front of the pump finishes it up.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20170819/8fdabad8/attachment.html>