[TR] Overdrive Update

[Gregory Donovan]

Randall,
To a mechanical caveman like me, this elegant mod is not so simple. 
What did you use to machine it?
What's it made of?
--Greg

      From: Randall <TR3driver at ca.rr.com>
 To: 'TERRY SMITH' <terryrs at comcast.net>; triumphs at autox.team.net 
 Sent: Sunday, August 6, 2017 11:13 PM
 Subject: Re: [TR] Overdrive Update
   
Too late this time, but if it happens again, you might want to consider a simple mod.  I made a custom nut and used a socket head screw, so that it was easy to get it tight enough and also allow adjustment without removing the tunnel. http://i.imgur.com/mMk04fs.jpg http://imgur.com/d6lB3gu Not shown is the short pin I cut to put in the adjustment lever with needle nose pliers. -- Randall
 
** triumphs at autox.team.net **

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/gregorydonovan@yahoo.com


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20170807/d370ea5b/attachment.html>