[TR] Gear shift lever

[David Friedlander]

Thanks, Randall. Using my die set, I've determined that the
shift lever on my TR4 OD transmission has a 5/16- 18 (NC)
thread .

Dave

On Sat, Apr 29, 2017 at 7:34 PM, <tr3driver at ca.rr.com> wrote:

> Yes. The TR3 lever is an unusual size (7/16-20 IIRC) while the TR4 is a
> smaller common size (5/16 ?).
> Probably because the TR3 lever is hollow while the TR4 is not.
>
> -- Randall
> On 29 Apr 2017 13:46, David Friedlander <forzion7 at gmail.com> wrote:
>
> Greetings all,
>
> Is the thread size/diameter of a TR4 gearshift lever (for mounting the
> gearshift knob) smaller than that of a TR3?
>
> Dave
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20170430/15d774ff/attachment.html>