[TR] TR4A vent lid seal

[Allen Hess]

I had the same problem years ago. I resorted to trimming it too thin the profile.

Allen

> On Mar 29, 2016, at 6:17 AM, john-marie at sbcglobal.net wrote:
> 
> Installed new vent lid seal.  Pressed rubber fully home, but vent lid will not close completely.  Before I start trimming the seal thought I'd check with List for similar experience and maybe a simple solution.  I don't believe additional compression from the lid will fix this.
> John DeLuca
> 
> Sent from my iPad