[TR] Grease nipple dimension TR3

[TR3driver at ca.rr.com]

Most of them are the 1/4-28 size, but I've sometimes see aftermarket suspension parts that used 1/8 NPT. And of course some are angled and some are straight. HF sells a cheap kit that will cover most of them.

Note that the 1/4-28 nipples actually use a special tapered thread that is designed to seal to a standard 1/4-28 hole.

Also, the U-joints use a special extended nipple. Replacement joints don't always come with them, so save the old ones.

--  Randall

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20160607/a8d875b5/attachment.html>