[TR] ZS Carb Questions

[Roger Elliott]

It is my understanding that if the fuel is too low in the carb, it could 
make it lean all of the time.

Roger
On 07/06/2016 07:17 AM, Harrymague at aol.com wrote:
> After doing some engine work, I notice that one of the cards had a 
> small leak.  I replaced the bottom float seal.  I doing so, I notice 
> that the float value appeared to be sticking so I replaced it.  I 
> check the float level and it appeared to be the 16-17 mm tolerance 
> listed.  I reinstalled the carb and noticed that the engine was 
> running a little rough.  I used my ColorTune.  It showed the carb was 
> running lean.  I attempted to adjust the mixture but could not get the 
> carb to run any richer.  My question is: if the float was not adjusted 
> correctly, making the level of fuel in the bowl low, could this cause 
> my inability to adjust the mixture rich??
> Thanks in advance for any suggestion.
> Harry Mague
> Beavercreek, OH
> 1973 1/2 TR6
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/elliottr@rmi.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20160708/d75aecc4/attachment.html>