[TR] hydraulic jack recommendadtions

[David Friedlander]

Harbor Freight has aluminum racing jack with low floor clearance.
I have the two-ton version and it works well.

One-and-a-half to 3-ton aluminum versions are available:

  http://www.harborfreight.com/catalogsearch/result?q=aluminum+jack

I'm sure you can spend more (or less) elsewhere but this item seems
pretty well made and a good value, to me.

YMMV,

Dave

On Mon, Jan 18, 2016 at 7:16 PM, Sujit Roy <triumphstag at gmail.com> wrote:

>
> After 16 years of good use my Sears 3 Ton jack is given me problems.
>
> The handle which is used to raise and lower the car also, if rotated ,is
> used to open and close a valve. through a gear mechanism Unfortunately, the
> gear mechanism has locked up.
>
> If I remove one of the gears, can can manually close and open the valve by
> hand, This works OK, but if I have the jack under the car, this involves me
> going under the car too. Something I don't want to do.
>
> So I'm on the hunt for a new jack. I'd like something light, but I need
> about 2 tons. I have  Stag.
> Any recommendations?
>
> Sujit
>
>
>
>
>
>
> ** triumphs at autox.team.net **
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/triumphs/forzion7@gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20160118/8528b39c/attachment.html>