[TR] ZS Carb Question

[Jim Henningsen]

Thanks for the responses.  I did put both gaskets on to sandwich the valve.
Jim

Sent from my iPad

> On Feb 25, 2016, at 6:24 PM, alan salvatore <alansalvy at gmail.com> wrote:
> 
> Every bypass kit I have used took two, they sandwich the rubber gasket.
> 
>> On Feb 25, 2016 5:18 PM, "David Porter" <frogeye at porterscustom.com> wrote:
>> ..it depends on the vacuum connection. If Joe sent you 2 then it probably uses both...
>> DaveP
>> 
>>> On 2/25/2016 2:38 PM, James Henningsen wrote:
>>> I am installing new carb kits on my Zenith Stromberg 175  carbs, actually for my 73 Jag, but exact to my TR6.  When you install a new valve in the by-pass valve, is there a gasket on both sides of the valve assembly?  The valve assembly is made attached to a rubber gasket.  The valve kit came from Joe Curto has two gaskets in addition to the valve assembly.  When I disassembled mine, one had no gasket and just the valve assembly between the halves, and the other had one gasket and the valve assembly.  Since each valve assembly kit comes with two gaskets, I am assuming you put one on each side of the valve assembly and then reassemble the halves together.  Any thoughts out there before I install back on the car?  Couldn’t find any info on the instruction sheet included or the parts manual. 
>>> 
>>> Thanks in advance,
>>> 
>>> Jim Henningsen
>>> 
>>> Ocala FL
>>> 
>>> 64 TR4
>>> 
>>> 73 Jag E Type
>>> 
>>> 75 TR6
>>> 
>>> 76 Celica
>>> 
>>> 
>>> 
>>> ** triumphs at autox.team.net **
>>> 
>>> Donate: http://www.team.net/donate.html
>>> Archive: http://www.team.net/archive
>>> Forums: http://www.team.net/forums
>>> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/frogeye@porterscustom.com
>> 
>> -- 
>> Dave Porter Porter Custom Bicycles 2909 Arno St. NE Albuquerque, NM 87107 505-352-1378 Go HERE: my world www.porterbikes.com/
>> 
>> 
>> ** triumphs at autox.team.net **
>> 
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/triumphs/alansalvy@gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/triumphs/attachments/20160225/f985add9/attachment.html>